Below si a copy of the phone features page located on all Allworx servers at their respective addressesMelonMelon432005-02-04T20:57:00Z2005-02-04T21:09:00Z180145673810535811.6359Allworx Phone FeaturesBelow is a copy of the phone features page located on all Allworx servers at their respective addresses. Just click on the “Phone Features” link. If the Allworx Private IP is 192.168.2.254 go to your browser and enter in http://192.168.2.254 and then click on the link to see the below list.Phone Featuresdialfeaturenotes0Initiate a call to the operator.Dial (or transfer) from any system phone. This will exercise the call route of extension '0'.1##Initiate a call to the user at ext. 1##.Dial (or transfer) from any system phone. This will exercise the currently active call route for that user (i.e. "My Call Route").2##Initiate a call to the resource at ext. 2##.Dial (or transfer) from any system phone. This will exercise the call route assigned to extension 2##. Routes must be configured by the system administrator.31##32##Leave user at 1## (2##) a voice mail messageDial (or transfer) form any system phone. Note that 32## only succeeds if extension 2## routes to a user's voicemail.34###350-399Business Speed Dial numbersDial (or transfer) from any system phone. The system administrator must preprogram these numbers into the system. See the "business directory" for a listing of programmed speed dial numbers.400Auto AttendantDial (or transfer) from any system phone.402Page (line out)Dial directly from a system phone. The audio will be broadcast through the Allworx "Line Out" jack (requires external speakers).420Enable Do Not DisturbDial directly from a system phone. The phone will not ring again until dialing 421.421Disable Do Not DisturbDial directly from a system phone.450Cancel Call ForwardingDial directly from a system phone.451##452##Forward calls to extension 1## (2##).Dial directly from a system phone. Future calls to the phone will now be forwarded to extension 1## (2##). Dial 450 to disable call forwarding.61##Voice Message Center for user at 1##Dial directly from a system phone, or from the Auto Attendant main menu.700Park a CallTransfer the call to extension 700 to park it. The auto-attendant will announce the extension for retrieval (701-709). Parked callers will hear hold music (if configured). Unretrieved calls will be transferred to the Auto Attendant after 10 minutes.Allworx 9102/9112 (PBX System Mode): <Transfer>, select new line, dial 700, listen for ext., <Transfer>Analog: [FLASH], dial 700, listen for ext., hang-upIP 20: [FLASH], dial 700, listen for ext., hang-upCisco 7905/7912: press R0lGODlhEAAQAPcAAAAAAP////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////// /////////////////////////////////////////////////////yH5BAEAAAEALAAAAAAQABAA AAhCAAMIHEiwoMGDCBMiBMCwYUIABiFGFNhQosSBFglmxBjgIkePED1S7KiRZMGQJUWSBDmSo0mX FVuenLiwokqFBQMCADs= , [NewCall], dial 700, listen for ext., [more], [Trnsfer]Cisco 7940/7960: [more], [Trnsfer], dial 700, listen for ext. [Trnsfer]NOTE: Allworx 9102/9112 (Key System Mode) phones park a call by pressing: <Hold>701-709Retrieve a Parked CallDial directly from a system phone to retrieve a parked call. A fast-busy signal indicates that no call is parked at the dialed extension (701-709).NOTE: Allworx 9102/9112 (Key System Mode) phones retrieve the parked call by selecting the line that was parked.71##72##Answer ringing extension 1## (2##)Dial directly from a system phone to answer a call currently ringing extension 1## (2##).8 + pincodeAudited outside line accessDial directly from a system phone to sieze an available outside line.9Outside line accessDial directly from a system phone to sieze an available outside line. This may be disabled by the system administrator per phone (phone then requires 8 + pincode).functiondescriptioninstructionsConsultationSuspend a call.Converse with a 3rd party.Resume the call.Allworx 9102/9112: <Hold>, select new line, dial number, talk, select original lineAnalog: [FLASH], dial number, talk, [FLASH]IP 20: [FLASH], dial number, talk, [FLASH]Cisco 7905/7912: press , [NewCall], dial number, talk, [EndCall], Cisco 7940/7960: [more], [Trnsfer], dial number, talk, [EndCall], [Resume]Call TransferTransfer a call with announcementAllworx 9102/9112: <Transfer>, select new line, dial number, talk, <Transfer>Analog: [FLASH], dial number, announce call, hang-upIP 20: [FLASH], dial number, announce call, hang-upCisco 7905/7912: [more], [Trnsfer], dial number, announce call, [more], [Trnsfer], wait for transfer to complete, hang up.Cisco 7940/7960: [more], [Trnsfer], dial number, announce call, [Trnsfer], wait for transfer to complete, hang up.Blind TransferTransfer a call without confirmationAllworx 9102/9112: <Transfer>, dial number, hang-upAnalog: [FLASH], dial number, hang-upIP 20: [FLASH], dial number, hang-upCisco 7905/7912: [more], [BlndXfr], dial numberCisco 7940/7960: [more], [BlndXfr], dial number3-way CallEstablish a conference with 2 other partiesAllworx 9102/9112: call first party, <Hold>, call second party, <Conference>, select call on-hold to conferenceAnalog: [FLASH], dial *33, dial number, announce conference, [FLASH]IP 20: [FLASH], dial number, announce conference, [SET]Cisco 7905/7912: [Confrn], dial number, announce conference, [Confrn]Cisco 7940/7960: [Confrn], dial number, announce conference, [Confrn]